Service routines
11
Expendable part
Change after ...
hours of operation
JK part no.
JK Ergoline SD power 25 W
approx. 550 hrs.
11122
JK Ergoline R super power
low-pressure sunlamp
approx. 400 hrs.
10521
JK Ergoline SR super power low-pressure
sunlamp
approx. 500 hrs.
10862
JK Ergoline R plus turbo power low-
pressure sunlamp
approx. 550 hrs.
11494
JK Ergoline SR turbo power low-pressure
sunlamp
approx. 450 hrs.
10855
JK Ergoline UV high-pressure bulb
approx. 400 to 600
hrs.
11292
Filter mats base
depending on degree
84149
Filter mats canopy
of soiling
84156
Component
Change after ... hours of
operation
JK part no.
Base acrylic
approx. 3000 hrs.
84226
Filter glass
approx. 5000 hrs.
51407
Fan
approx. 5000 hrs.
76817
Steel rope (lifting mechanism)
5 years,
max. 10000 Std.
51320
Spring (lifting mechanism)
5 years,
max. 10000 hrs.
51241
Spring (drop guard)
5 years,
max. 10000 hrs.
51335
Cleaning and changing lamps
CAUTION
Disconnect mains plug before gaining access to the interior of the sunbed.
In the case of permanently installed sunbeds, deactivate or remove fuses to disconnect the sun-
bed from the power supply.
CAUTION
We point out that the sunbed must be checked in appropriate recurring intervals to keep it in
proper working order!
•
Only use genuine JK Ergoline parts of the same type to replace low-pressure UV sunlamps, high-
pressure UV bulbs or filter glasses.
•
The use of other low-pressure UV sunlamps, high-pressure UV bulbs or filter glasses will invalidate CE
conformity and GS testing.
•
In order to maintain tanning efficiency, we recommend cleaning the tubes after approx. 200 - 300 hours of
operation.
•
On sunbeds with JK computer control, operating hours are indicated on the display of the remote control
or token box. See "Microcomputer control" operating instructions.
Instructions on care and cleaning
CAUTION
If steel rope and spring are not changed in good time, they may snap or break. This may cause
the canopy to collapse and injure the sunbed user.
ATTENTION
Important information on looking after and cleaning your sunbed.
Use only the special JK fast-acting disinfectant cleaner on the plexiglass surfaces. For best
results, clean the other plastics with warm water and a leather only. Never use aggressive
cleaners, such as commercially available Sagrotan, products containing alcohol or essential oils.
With time, these cleaning agents will cause damage that is not covered by the warranty.
Verwenden Sie für die Dekorblenden je nach Verschmutzungsgrad ein feuchtes Tuch, warme
Seifenlauge oder ein handelsübliches Reinigungsmittel ohne schleifende oder stark alkalische
Bestandteile.
NOTE
The formed edges of the acrylic panels may be slightly uneven and contain air inclu-
sions. It is also possible during cleaning for the rubber seals to leave traces of black on
the cloth.
Neither of these conditions is abnormal and should not give rise either to concern or
complaint.
!
!
!
!