STEP 4
STEP 3
Attach the foot (Part 5) to the bottom of the Lift Column (Part 3) and
align the screw holes. Insert and fasten using 4 screws from Pack A
in a criss-cross pattern.
Repeat the same process for the other Lift Column.
Insert the Side Bracket (Part 4) into the End Frame
(Part 1) and align the screw holes as shown.
Note: You may need to gently tap the bracket
into place to align the screw holes.
Insert and fasten using 2 screws from Pack B.
Repeat the same process for the other Lift
Column.
If there is difficulty fastening the screws,
it may be because some of the earlier
installed screws were fastened too tightly.
Loosen if necessary.
