STEP 1
CENTER SCREW HOLE
Lay out all the parts to ensure that all items in the parts list are
present.
Fully separate the End Frames (Part 1). You will find the Cross Rails
(Part 2) inside.
Position Lift Column (Part 3) into the End
Frame (Part 1) as shown in the diagram.
Note: Orientate the center screw hole of
the End Frame flushed to the top surface
of the Lift Column.
Align the edge holes of the Lift Column
with the holes in the End Frame. Insert
and fasten loosely using 4 screws from
Pack A with the supplied 4mm Allen Key
(Part 17).
Do not tighten the screws yet.
Repeat the same process for the other
Lift Column.
STEP 2
