Ergo Elite 2, Руководство пользователя, Страница: 45 / 94

Elite 2 User's Manual Batteries
Page 6-7
Suspend-To-Disk (Hibernation Mode)
There are four ways to perform Suspend-To-Disk mode:
•
Press the Hot Keys < Fn > < F4 >.
•
Allow the system to invoke this action, by setting the Suspend Time Out , and
setting the Suspend Mode to DISK in Chapter 11.5 .
•
System would perform Suspend-to-Disk automatically when enters Battery LOW
2 . For detail on Battery LOW 2 , refer to Chapter 6.5.
•
If Power Switch Type and Suspend Mode are set to Suspend and DISK
respectively, pressing the Power Switch for less than 4 seconds would effectively
set the system to Suspend-To-Disk mode.
When Suspend-To-Disk is invoked, all data in memory and system status will be saved
to the Suspend-To-Disk file (refer to Chapter 10 ). The system will shut the power
down automatically. When you power-on the computer again, you will return exactly
where you left off.
Note:
For more information on Suspend-To-DRAM , and Suspend-To-Disk , refer
to Chapter 11.5 and Chapter 10 . For more information on Hot Key s, see
Appendix B .
Note:
If Suspend-To-Disk file has not been created, system would actually
perform a Suspend-To-DRAM when a Suspend-To-Disk request is issued.
6.8 Reducing Power Consumption
Although power conservation is a built-in function of your Elite 2 , there are measures
you can take to reduce the power consumption:
Ÿ
Use the AC power whenever possible.
Ÿ
Lower the intensity of the LCD backlight. A very bright screen translates to
increased power usage.
Ÿ
Try to use the HDD or the PCMCIA drive to read and write files, rather than using
the FDD.