erbrich 14-807, Руководство по эксплуатации

Страница: 11 / 16

27
1. MECHANICAL CLEANING:
Mechanical cleaning is the preferred method. Strictly follow the instructions supplied by the manufacturer of the cleaning machine.
Prepare the instruments and attachments for mechanical cleaning. Multipart instruments and attachments that can be dismantled
PXVWEHWDNHQDSDUWRURSHQHGIRUFOHDQLQJ$OOWLSVDQGGHOLFDWHSDUWVVKRXOGEHFOHDQHGPDQXDOO\'RQRWRYHU¿OOZLUHWUD\VSODFH
heavy parts on the bottom of the tray. Heavily contaminated parts (cannulated instruments and attachments) may need soaking and
ÀXVKLQJWKURXJKEHIRUHWKH\DUHSXWLQWKHZDVKLQJPDFKLQH
8/75$621,&&/($1,1*FODVVL¿HGDVDW\SHRIPHFKDQLFDOFOHDQLQJ
Remove excess exudates before placing instruments or attachments in the ultrasonic bath. Ultrasonic baths are recommended, e.g.
for taps or instruments and attachments with deep grooves. Ultrasonic cleaning must be followed by normal rinsing.
3. MANUAL CLEANING:
Requires various nylon brushes, blowing tube and nozzle, clean compressed air device, cleaning agents and solvents as for mecha-
QLFDOFOHDQLQJ2EVHUYHWKHPDQXIDFWXUHU¶VLQVWUXFWLRQVIRUFOHDQLQJDGGLWLYHV'RQRWXVHVWHHOZRRORUZLUHEUXVKHV7UHDWDQRGL]HG
aluminium with extreme care. Any residues remaining after brushing must be removed completely.
4. DRYING:
Every instrument and attachment must be completely dried inside and outside to prevent rust formation and malfunctioning. A com-
pressed air system can be used for hollow parts and hinges. Please note: If the instruments and attachments are to be reused imme-
diately and sterilised without packaging, then drying is not necessary.
5. LUBRICATION:
7KHMRLQWVDQGDOOPRYLQJSDUWVRILQVWUXPHQWVDQGDWWDFKPHQWVPXVWEHFOHDQHGDQGOXEULFDWHGDIWHUXVH2QO\XVHELRORJLFDORLOVDQG
acid-free lubricants: pure cooking oil is recommended. If special instrument oil solutions are used, the instruments and attachments
can be immersed for a certain period of time. With some instrument washing machines, the lubrication process is incorporated. No
rinsing is required after lubrication. Remove any excess oil before packaging the instruments and attachments!
STERILISATION:
Clean and dry instruments immediately after use. Do not use clean agents or disinfectants with strongly acid or alkaline additives (e.g.
VRGDVRGLXPK\GUR[LGHVROXWLRQRUDFLGV7KHJHQWOHVWFOHDQLQJPHWKRGLVPDFKLQHPHFKDQLFDOFOHDQLQJDVDOUHDG\GHVFULEHGLQ
the User´s Manual.
ONLY STEAM-STERILISE INSTRUMENTS AND ATTACHMENTS!
TECHNICAL SPECIFICATIONS FOR STERILISATION
Before operation, check the instruments and attachments are in perfect condition and functioning correctly!
STERILISER:
6WHDPDXWRFODYHWHPSHUDWXUH ƒ&WRƒ&SUHVVXUH WRSVLWREDUDWOHDVWPLQXWHVLQSDFNDJHGVWDWH$WD
WHPSHUDWXUHRIƒ&WRƒ&DQGDSUHVVXUHRIWRSVLWREDUWKHUHTXLUHGH[SRVXUHWLPHGHFUHDVHVWRDSSUR[
minutes
$XWRFODYHZLWKSUHYDFXXPGXULQJWKHSUHYDFXXPSKDVHWKHDLULVHYDFXDWHGIURPWKHFKDPEHUEHIRUHWKHVWHDPÀRZVLQ6WDQGDUG
F\FOHIRUSDFNDJHGREMHFWV ƒ&WRƒ&DWWRSVLWREDUZLWKDPLQLPXPH[SRVXUHWLPHRIWRPLQXWHV
IMPORTANT INFORMATION:
Before using or sterilising any instruments, always check that all parts are functioning correctly.
IF IT IS SHOWN THAT THIS USER´S MANUAL HAS NOT BEEN ADHERED TO, ALL WARRANTY RIGHTS SHALL LAPSE
GB