15
14
BATTERY PACK POWER BAR
The Li-Ion battery pack (5) is equipped with a POWER BAR which is used to give an
indication of the battery pack’s remaining charge. Press the POWER BAR button (7) to
check battery charge as below. The LED will stay lit for approximately 5 seconds
.
7
76-100% Charge
51-75% Charge
26-50% Charge
5-25% Charge
under 5% Charge
Flash
On
Off
INSTALLING AND REMOVING NOZZLES (B)
To install, firmly insert one of the nozzles completely into the intake port on the dust
canister (1). To remove, simply pull the nozzle out of the dust canister.
INSTALLING AND REMOVING THE EXTENSION TUBE (B)
To install, firmly insert the extension tube (10) completely into the intake port on the dust
canister (1), then insert one of the nozzles into the tube.
To remove, simply pull the extension tube out of the dust canister.
USE
ON/OFF SWITCH (C)
To turn the vacuum cleaner on, push the on/off switch (3) forward.
To turn the vacuum cleaner off, push the on/off switch (3) backward.
OPERATING (D1-D4)
Before using, check and ensure that the filter assembly (11) is assembled securely
without cracks or damages.
Select a suitable nozzle for desired use. The extension tube (10) can be used if
necessary..
Hold the product by its gripping handle (4). Keep the gripping handle (4) dry to ensure
safe support.
Switch the product on and push it at an even speed for cleaning.
TROUBLESHOOTING
Dust in the dust canister and filter may cause weak power for the vacuum cleaner. The
solution is cleaning the dust canister and filter or changing a new one.
