Erbauer ERB666GRD, Оригинальное руководство пользователя

Страница: 19 / 24

750W 115mm ANGLE GRINDER ERB666GRD
3. Grinding/Cutting Disc(See Fig 2-3).
Pay attention to the dimensions of the grinding
disc. The mounting hole diameter must fit
the inner flange (5) without play. Do not use
reducers or adapters.
When using a diamond cutting disc, take care that
the direction-of-rotation arrow on the diamond
cutting disc and the direction of rotation of the
machine (direction-of-rotation arrow on the
machine head) agree.
For mounting, see the Component list
illustration page
.
Screw on the outer flange (6) and tighten with the
two-pin spanner (4).
Adjusting the protection guard
For work with grinding or cutting discs, the
wheel guard must be mounted.
Open the clamping lever (9). Place the wheel
guard (10/12) with coded projection into the coded
groove on the spindle of the machine head and
rotate to the required position (working position).
To fasten the wheel guard (10/12), close the
clamping lever and loosen the clamp adjustment
screw, if necessary.
The closed side of the wheel guard (10/12) must
always point to the operator.
Note: With the clamping lever (9) open the clamp
adjustment screw(7) can be adjusted to ensure the
guard is securely clamped after the clamping lever
(9) is finally closed.
Wheel Guard for Cutting
WARNING!
For cutting metal, always work
with the wheel guard for cutting (12).
For grinding, always work with the wheel guard for
grinding(10).
OPERATION
Operating Instructions
• Clamp the workpiece if it does not remain
stationary due to its own weight.
• Do not strain the machine so heavily that it
comes to a standstill.
• Grinding and cutting discs become very hot while
working; do not touch until they have cooled.
• Pull the plug from the socket-outlet when not
using the machine. With the plug inserted and
mains voltage existing, the power tool still has low
Fig. 1
Fig. 2-1
Fig. 2-2
Fig. 3
Fig. 2-3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
15
o
-30
o
8
Inner flange
Outer flange
Disc
Inner flange
Outer flange
Disc