Erbauer ERB666GRD, Оригинальное руководство пользователя

Страница: 18 / 24

OPERATING INSTRUCTIONS
Note: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting metal, a special protection guard
for cutting (accessory) must be used.
ASSEMBLY AND ADJUSTMENT
Mounting the Protective Devices
1. AUXILIARY HANDLE (See Fig 1).
For all work with the machine, the auxiliary
handle (3) must be mounted.
Screw the auxiliary handle (3) on the right or left
of the machine head depending on the working
method.
Do not make any alterations to the
auxiliary handle. Do not continue to use
an auxiliary handle if it is damaged.
Mounting the Grinding Tools
Before any work on the machine itself, pull the
mains plug.
Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
1. Spindle lock button
Clean the grinder spindle and all parts to be
mounted. For clamping and loosening the grinding
tools, lock the grinder spindle (8) with the spindle
lock button (1).
Actuate the spindle lock button (1) only when
the grinder spindle is at a standstill!
2. Adjustable outer flange clamping (See Fig
2-1.2-2) .
The outer flange (6) should be adjusted to suit
different disc thickness. For thinner cutting or
diamond discs the raised part of the outer flange
is fitted facing away from the disc. For thicker
grinding discs the raised part of the outer flange is
fitted facing towards the disc to provide improved
support for the disc hole. Always ensure your disc
is securely clamped.
Fig. 1
Fig. 2-1
Fig. 2-2
Fig. 3
Fig. 2-3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
15
o
-30
o
8
Inner flange
Outer flange
Disc
Inner flange
Outer flange
Disc