Erbauer ERB385DRL, Оригинальное руководство пользователя

Страница: 6 / 20

ADDITIONAL SAFETY POINTS FOR YOUR PERCUSSION DRILL
1. Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal
injury.
3. Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
4. Do not use the drill near water.
5. Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
6. Fully unwind extension cords to avoid potential overheating.
7. When an extension cord is required you must ensure it has the correct ampere rating for
your power tool and that it is in a safe electrical condition.
8. Ensure your supply voltage is the same as your tool rating plate voltage.
9. Your tool is double insulated for additional protection against a possible electrical insulation
failure within the tool.
10. Always check walls and ceilings to avoid hidden power cables and pipes.
11. After long working periods, external metal parts and accessories could be hot.
12. Wear eye protection when operating this tool.
Warning: Some dust particles created by power sanding, sawing, grinding, drill
and other construction jobs contain chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated timber.
Your risk from these exposures varies, depending upon how often you do this type of work. To
reduce your exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as those dust masks that are specially designed
to filter microscopic particles.