Erbauer ERB371GRD, Оригинальное руководство пользователя, Страница: 17 / 24

2300W 230MM ANGLE GRINDER
9. TO USE THE GRINDER
Attention: Do not switch the grinder on
whilst the disc is in contact with the
workpiece. Allow the disc to reach full speed
before starting to grind.
Hold your angle grinder with one hand on the main
handle and other hand firmly around the auxiliary
handle.
Always position the guard so that as much of the
exposed disc as possible is pointing away from you.
Be prepared for a stream of sparks when the disc
touches the metal.
For best tool control, material removal and minimum
overloading, maintain an angle between the disc
and work surface of approximately 15
o
-30
o
when
grinding.
Use caution when working into corners as contact
with the intersecting surface may cause the grinder
to jump or twist.
When grinding is complete allow the workpiece to
cool. Do not touch the hot surface.
10. CUTTING
Warning: For cutting metal, always work
with the wheel guard for cutting.
When cutting, do not press, tilt or oscillate the
machine. Work with moderate feed, adapted to the
material being cut.
Do not reduce the speed of running down cutting
discs by applying sideward pressure.
The direction in which the cutting is performed is
important.
The machine must always work in an up-grinding
motion. Therefore, never move the machine in the
other direction! Otherwise, the danger exists of it
being pushed uncontrolled out of the cut.