Erbauer ERB371GRD, Оригинальное руководство пользователя, Страница: 16 / 24

2300W 230MM ANGLE GRINDER
6. ADJUSTABLE OUTER FLANGE CLAMPING
The outer flange (7) should be adjusted to suit different
disc thickness. For thinner cutting discs the raised
part of the outer flange is fitted facing away from
the disc (See Fig.5-2). For thicker grinding discs the
raised part of the outer flange is fitted facing towards
the disc to provide improved support for the disc hole
(See Fig.5-1). Always ensure your disc is securely
clamped.
7. GUARD ADJUSTMENT (See Fig. 6)
Before any work on the machine itself, pull the
mains plug.
For work with grinding or cutting discs, the
wheel guard must be mounted.
Wheel Guard for Grinding
The coded projection on the wheel guard (13) ensures
that only a guard that fits the machine type can be
mounted.
Open the clamping lever (8). Place the wheel guard
(13) with coded projection into the coded groove on
the spindle of the machine head and rotate to the
required position (working position).
To fasten the wheel guard (13), close the clamping
lever (8).
The closed side of the wheel guard (13) must always
point to the operator.
Note: With the clamping lever (8) open the clamp
adjusting nut (9) can be adjusted to ensure the guard
is securely clamped after the clamping lever (8) is
finally closed.
Wheel Guard for Cutting
Warning: For cutting metal, always work with
the wheel guard for cutting.
The wheel guard for cutting (14) is mounted in the
same manner as the wheel guard for grinding.
8. REMOVING THE GUARD
Never remove your guard for any other working
conditions. To remove, first take off the disc and
both flanges. Then open the clamping lever (8) and
rotate the guard to align the projections with the gear
case cut outs, then remove the guard. To re-fit the
guard, repeat this process in reverse. Keep all parts
in a safe place.
Fig. 4
Fig. 5-1
Fig. 5-2
Fig. 6
A
B
15
16
17
A
B
15
16
17
A
B
15
16
17
A
B
15
16
17