Erbauer ERB2002, Руководство пользователя

Страница: 15 / 19

230mm Angle Grinder
PLUG REPLACEmENT
The fuse in the main plug of your power tool
should always be replaced with one of identical
rating.
Check the voltage given on your power tool
matches the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug fol-
lows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in ac-
cordance with the following code:
Blue — Neutral
Brown — Live
The wire that is coloured blue must be connect-
ed to the terminal that is marked with the letter
N
. The wire that is coloured brown must be con-
nected to the terminal that is marked with the
letter
L
.
A 10 AMP (BS1363 or BS1363/A) plug must be
used and a 10 AMP fuse must be fitted.
CABLE GRIP
BROWN
L (LIVE)
10 AMP
FUSE
BLUE
N (NEUTRAL)
OUTER
SLEEVE