Erbauer ERB125Y, Руководство пользователя, Страница: 11 / 20

1500W WALL CHASER
Once you have determined your optimum
groove width carefully mount a diamond wheel
to the spindle, then mount the distance washers
and second diamond wheel as appropriate.(see
fig7&8)
CAUTION
: The support flange must always
be located to the drive spindle and should
not be free to rotate, make sure it is fully located
prior to loading the disc’s and distance washers!
NOTE
: Always make sure that you have
mounted the wheels correctly and in
accordance with the direction arrows on the
diamond disc and the body of the machine.(see
fig 9)
Now mount the outer flange and tighten using
the spanner provided, again note that this is a
LEFT HAND thread so tighten in an anti-clockwise
direction. At the same time depress the spindle-
locking button.(see fig10&11)
Fig 6
Fig 7
Adjusting the groove width (the distance between the two diamond wheels)
The width of grooving in the workpiece can be adjusted by changing the
number of the space rings as shown in the table
Groove width:29.8mm
Groove width:16.9mm
Groove width:25.5mm
Groove width:12.6mm
Groove width:21.2mm
Groove width:8.3mm
1
2
4
5
6
3
1.outer flange 2.diamond wheel 3.distance washers
4.diamond wheel 5.support flange 6.drive spindle