Erbauer ERB125Y, Руководство пользователя

Страница: 10 / 20

Fig 2
Fig 3
Fig 4
Fig 5
OPERATION INSTRUCTIONS
WARNING
Before using your wall chaser be sure to
read this instruction manual carefully!
NEVER press the spindle locking button while the
machine is running.
ALWAYS unplug the tool from the power supply
BEFORE carrying out any adjustments or
maintenance.
1. Fitting Cutting Discs
CAUTION
Use only diamond cutting discs suitable for
the material to be cut.
This tool is designed to cut such materials as
reinforced concrete and masonry without the use
of water.
Firstly loosen the adjusting channel depth knob
and then loosen the flange cap lock knob. You
can now slide the flange cap up and reveal the
flange.(see fig 2)
Using the spanner provided you can undo the
flange, at the same time depress the spindle-
locking button.(see fig 3&4)
NOTE: This is a left hand thread therefore
turn the spanner CLOCKWISE.
Completely remove the flange and the distance
washers.
IMPORTANT NOTE: There is one rubber
‘transit’ washer fitted, remove and aside
this prior to fitting the cutting blades DO NOT
USE these during normal operation.
Now assemble the blades and distance washers
to suit your application.(see fig5&6)
2. Adjusting the groove width
You can adjust the groove width (the distance
between the two diamond wheels) by simply
changing the distance washer position as shown
in the table below: