background image

6 kg SDS-MAX ROTARY HAMMER

Congratulations  on  your  purchase  of  a  quality  power  tool.  This  product 

should give you reliable service but for your peace of mind this 

power tool does carry a 24-month guarantee, the terms of which are de-

tailed below.

If this product develops a fault within the guarantee period contact your 

retailer.

Please  retain  this  handbook  in  case  you  need  to  refer  to  safety,  care  or 

guarantee information in the future.

GUARANTEE

This 

 product carries a guarantee of 24 months. If your product develops a 

fault within this period, you should, in the first instance contact the retailer where the 
item was purchased.

This guarantee specifically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (such as batteries) -Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods

This guarantee does not affect your statutory rights. This guarantee is only valid in 
the UK.

For  further  technical  advice  and  spare  parts,  please  contact  the  customer  helpline 
number on 0870 205 2945.

Содержание ERB121SDS

























Отзывы: