Erbauer ERB121SDS, Руководство пользователя

Страница: 6 / 24

4
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY RULES FOR YOUR ROTARY HAMMER
This is a powerful rotary hammer. Caution needs to be observed when operating.
1. If the supply cord is damaged have it replaced by a qualified person.
2. Always wear a dust mask.
3. Dress in suitable overalls.
4. Safety boots are recommended at all times especially when using the chisel
action.
5. Proper safety gloves are also recommended.
6. When using chisel a dust mask is necessary because of the dust created by the
action.
7. Wear ear protectors. Exposure to noise can cause hearing loss.
8. This heavy duty high torque machine should not be used, while standing on a
ladder.
9. Watch out for the initial torque reaction of the drill, especially when drill bit is
tight.
10. Do not use damaged or worn drills.
11. Do not run the machine with any part of the casing missing or damaged.
12. Check walls for hidden electric cable, gas and electric pipe before you start any
drilling task.
13. Chisel bits and drill bits may be flung out of the machine accidentally and cause
serious injury.
14. Before starting to work, always check that the chisel or drill bit is properly locked
in the chuck.
15. Vibrations can injure the hand-arm system. Keep exposure to vibrations as short
as possible.
16. When carrying out work, always hold the drill with both hands and ensure that you
have a stable standing position.
17. In cold weather or when the tool has not been used for a long time, let the tool
warm up for a while by operating it under no load. This will loosen up the lubrica-
tion. Without proper warm up, hammering operation is difficult.
18. This Rotary Hammer has an Overload Clutch. If the drill becomes jammed or
caught, the drive to the drill spindle is interrupted. Because of the forces that oc-
cur as result, always hold the machine securely with both hands and take a firm
stance.
19. Always use the appropriate safety equipment that is required for the product e.g.
goggles/safety spectacles, ear defenders (essential with tools with a noise rating
of over 85 dB (A), gloves and face masks. In all cases ensure that the safety equip-
ment is in good condition.