Erbauer ERB110SSW, Руководство пользователя

Страница: 17 / 24

70W SCROLL SAW
4. Adapter for saw blades
a) Attaching the blade adaptors to plain end
blades
Adjust one setscrew on each adaptor until it cov-
ers approximately half the hole.
(Fig.F1)
Loosen the other setscrew just enough to slide
one adaptor onto each end of the blade (6) as
shown.
(Fig.F2)
Place the blade and adaptors into the gauge to
set the blade to the proper length as shown in
(Fig.F3).
b) Attaching the blade adaptors to plain end
blades for side cutting
(Fig.F4)
a.Remove both setscrews from each blade adap-
tor, thread them into the opposite holes in the
blade adaptor perpendicular to the adjustment
pin, and repeat steps above with the blade in the
side cutting position.
b.Cutting from the side of the saw will be nec-
essary when your workpiece exceeds 405mm in
length. With the blade positioned for side cutting,
the table must always remain in the 0° bevel posi-
tion.
WARNING:
Do not attempt to cut a bevel with the blade
positioned for side cutting.
Fig.F4
Fig.F1
Fig.F2
Fig.F3