3. Fitting the blade (cutter) guard (9) (See
Fig 5-9):
1) Familiarise yourself with the blade guard
locating pivot pin (a), and the blade guard limiting
screw pole (b) situated on the side of the planer
out-feed table (13).
2) Remove the limiting screw.
3) Slide the guard arm assembly (14) over the
locating pivot pin.
4) Replace the limiting screw and tighten to
secure.
5) Fitting the cutter guard to the guard assembly
arm (14):
• Set out the parts as shown in Fig 9.
• Slide the arm into the guard.
• Ensure the holes on the guard and arm line up.
• Push the threaded spacer through the holes.
• Secure with the thumbscrew.
Fig 6
Fig 7
Fig 8
Fig 9
a
b
Fig 5
BTP210F-M-070928.indd 12
2007-9-28 13:35:55
