Erbauer ERA563DRL, Оригинальное руководство пользователя

Страница: 15 / 20

2kg HAMMER DRILL ERB562DRL/ ERA563DRL
Warning: Always use the auxiliary handle.
5. FORWARD AND REVERSE ROTATION
CONTROL
With the drill pointing away from you, push the
forward/reverse-lever (5) to the left “ “for forward
rotation. Push the forward/reverse-lever (5) to the
right for reverse rotation “ “.
Warning: Never change the direction of rotation
while the tool is rotating, wait until it has stopped.
6. ADJUSTABLE DEPTH GAUGE
Fit the drill bit into the chuck. Loosen the depth gauge
by rotating the auxiliary handle anti-clockwise. Slide
the depth gauge until the distance between the depth
gauge end and the drill bit end is equal to the depth of
hole/screw you wish to make. Then clamp the depth
gauge by rotating the handle clockwise.
7. FUNCTION MODE SELECTION (See Fig. 4)
The operation of the gearbox for each application is set
with the function mode selection switch (4). To change
between functions, depress the unlocking button (12)
and rotate the selector to the desired operating mode.
For impacting only - for
light chipping, chiseling
and demolition applications
choose the Hammer
position.
For drilling into steel, wood
and plastics choose the
Rotary drilling position.
For simultaneous drilling
and impacting of concrete
or masonry, choose the
Hammer drilling position.
Warning: The operating mode selector switch
may be actuated only at a standstill.
Fig. 1-2
Fig. 1-1
Fig. 3
Fig. 2
Fig. 4
12