Erbauer EAG18-Li, Оригинальное руководство пользователя

Страница: 14 / 19

27 26
To fasten the safety guard (10), close the clamping lever and loosen the clamp
adjustment screw (12), if necessary. The closed side of the safety guard (10) must
always point to the operator.
NOTE:
With the clamping lever (11) open the clamp adjustment screw (12)
can be adjusted to ensure the guard is securely clamped after the clamping
lever (11) is finally closed.
WHEEL GUARD FOR CUTTING ( F)
.
WARNING!
For cutting metal, always work with the wheel guard for
cutting. For grinding, always work with the wheel guard for grinding.
For cutting-off application, position the front cover with the closed side on the grinding
guard and push it on until it engages .
AUXILIARY HANDLE ( B).
For all work with the machine, the auxiliary handle (9) must be mounted. Screw the
auxiliary handle (9) in one of the mounting threads (2) of the machine head depending on
the working method.
WARNING!
Do not make any alterations to the auxiliary handle. Do not
continue to use an auxiliary handle if it is damaged
MOUNTING THE GRINDING/CUTTING WHEELS
Before any work on the machine itself, remove the battery pack.
Grinding and cutting wheels become very hot while working; do not touch until they have
cooled.
1. Spindle lock button
Clean the grinder spindle and all parts to be mounted. For clamping and loosening the
wheels, lock the grinder spindle (13) with the spindle lock button (1).
WARNING!
Actuate the spindle lock button (1) only when the grinder
spindle is at a standstill!
2. Adjustable outer flange clamping ( C1, C2).
The outer flange (16) should be adjusted to suit different wheel thickness. For thinner
cutting or diamond discs the raised part of the outer flange is fitted facing away from the
disc. For thicker grinding wheels the raised part of the outer flange is fitted facing towards
the wheel to provide improved support for the wheel hole. Always ensure your wheel is
securely clamped.
3. Grinding/Cutting wheel ( D).
Pay attention to the dimensions of the grinding/cutting wheel. The mounting hole
diameter must fit the inner flange (14) without play. Do not use reducers or adapters.
When using a diamond cutting disc, take care that the direction-of-rotation arrow on the
diamond cutting disc and the direction of rotation of the machine (direction-of rotation
arrow on the machine head) agree
Screw on the outer flange (16) and tighten with the two-pin spanner (17).
ADJUSTING THE SAFETY GUARD ( E).
For work with grinding or cutting wheels, the safety guard must be mounted.
Open the clamping lever (11). Place the safety guard (10) with coded projection into the
coded groove on the spindle of the machine head and rotate to the required position
(working position).