EN Description of Control Panel
2,5 kW
BGP2108-25-1
Left Knob
Selector with heat setting
FUNCTIONS / SETTINGS
Unit is Off
Fan Runs - No Heating/25 W
Fan Runs - Full Power Heating/1250 W
Fan Runs - Full Power Heating/2500 W
Right Knob
Thermostat dial
Using Instructions
• Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet
environments and flammable objects.
• Connect the fan heater to the mains.
• Set the thermostat knob to the MAX and let the heater operate with full power.
• The fan heater will switch on when the heating selector is set to one of the power settings.
• Once the room reaches the required temperature, heating element will stop working but fan also
working. Once the temperature decreased, the heating element will be working. The fan heater now
starts and stops automatically and thus keeps the room temperature constant.
• Before switch off the heater, please turn the switch to fan position, let the appliance cool down for two
minutes then turn off the heater and pull out the plug.
• Depending on the power cord type this fan heater may be used only in household, warehouses and
workshops, building sites or greenhouses depending. It incorporates a thermostat and a self-resetting
thermal cut-out to control the heating elements. The thermostat feels the air temperature and controls
the surrounding temperature. The fan motor is controlled by thermostat and it will stopped when the
thermostat cuts off the heating element. The self-resetting thermal cut-out will switch off the heater to
ensure the safety when overheating.
EN
Use
25
213978_s1_s1_5059340130361_ERBAUER_A5_IM_MULTI_V03.indd 25
213978_s1_s1_5059340130361_ERBAUER_A5_IM_MULTI_V03.indd 25
03-05-2021 14:08:10
03-05-2021 14:08:10
