Erbauer 3663602784357, Оригинальное руководство пользователя

Страница: 21 / 28

21
FUNCTION MODE SELECTION
The operation of the gearbox for each application is set with the function mode selection
switch (9). To change between functions, depress the unlocking button and rotate the
selector to the desired operating mode.
For impacting only - for light chipping, chiseling and demolition
applications choose the Hammer position.
For drilling into steel, wood and plastics choose the Rotary drilling
position.
For simultaneous drilling and impacting of concrete or masonry,
choose the Hammer drilling position.
Adjustable working angle when using flat chisel.
(The tool must not be operated when the switch is in that position)
WORKING HINTS FOR YOUR HAMMER
If your power tool becomes over heated, set the speed to maximum and run no load for 2-3
minutes to cool the motor. SDS-plus tungsten carbide drill bits should always be used for
concrete and masonry.
When drilling in metal, only use HSS drill bits in good condition. Where possible use a
pilot hole before drilling a large diameter hole.