Erbauer 3663602784357, Оригинальное руководство пользователя

Страница: 20 / 28

20
USE
01 INTENDED USE
The machine is intended for hammer drilling in concrete, brick and stone as well as for
light chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic
and plastic.
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
02 OPERATION
ON/OFF SWITCH WITH VARIABLE SPEED CONTROL
Depress to start and release to stop your tool. This tool has a variable speed switch
(7) that delivers higher speeds with increased trigger pressure - speed is controlled by
varying the pressure applied to the switch.
SWITCH LOCK-ON BUTTON (D)
Depress the on/off switch (7) then the lock on button (5); Release the on/off switch first
and the lock-on button second. Your switch is now locked on for continuous use. To
switch off your tool just depress and release the on/off switch.
SPEED DIAL (E)
Limit the maximum speed using the speed dial (8). The variable speed device enables
you to select the best speed for a particular application
• Turn the speed dial (8) in plus direction “+” to increase the maximum speed.
• Turn the speed dial (8) in minus direction “-” to decrease the maximum speed.
FORWARD AND REVERSE ROTATION CONTROL (F)
With the drill pointing away from you, push the forward/reverse rotation control (4) to
the left for forward rotation. Push the forward/reverse rotation control (4) to the right for
reverse rotation
WARNING!
Never change the direction of rotation while the tool is
rotating, wait until it has stopped.