13
12
d.
Check the hedge for foreign objects before operation, e.g.
wire fences.
Take care that the cutting device does not come
into contact with wire or other metal objects.
e.
Hold the hedge trimmer properly, e.g. with both hands if
two handles are provided.
Loss of control can cause personal
injury.
ADDITIONAL SAFETY WARNINGS FOR POLE HEDGE TRIMMER
IMPORTANT:
READ CAREFULLY BEFORE USE.
KEEP FOR FUTURE REFERENCE.
WARNING!
When using the product the safety rules must
be followed. For your own safety and that of bystanders
please read these instructions before operating the product.
Please keep the instructions safe for later use.
TRAINING
a. Read the instructions carefully. Be familiar with the controls and
the proper use of the product.
b. Never allow people unfamiliar with these instructions or children
to use the product. Local regulations can restrict the age of the
operator.
c. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their property.
PREPARATION
a. THIS PRODUCT CAN CAUSE SERIOUS INJURIES. Read
the instructions carefully for the correct handling, preparation,
maintenance, starting and stopping of the product. Become
familiar with all controls and the proper use of the product.
b. Never allow children to use the hedge trimmer.
c. Beware of overhead power lines.
d. Never operate the product while people, especially children, or
pets are nearby.
e. Dress properly! Do not wear loose clothing or jewellery, which
can be caught in moving parts. Use of sturdy gloves, non-skid
footwear and safety glasses is recommended.
f. Wear eye and hear protection and stout shoes at all times while
operating the product.
g. If the cutting attachment strikes any foreign object or the
product starts making any unusual noise or vibration, shut off
the power source and allow the product to stop. Switch the
product off, disconnect it from the power supply and take the
following steps:
• inspect for damage,
• check for, and tighten, any loose parts,
• have any damaged parts replaced or repaired with parts having
equivalent specifications.
OPERATION
a. Use the product only in daylight or good artificial light.
b. Never operate the product with damaged guards or shields or
without guards or shields in place.
c. Keep hands and feet away from the cutting device at all times
and especially when switching on the motor.
d. Before using the product and after any impact, check for signs
of wear or damage and repair as necessary.
e. Always disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery pack)
• whenever leaving the product unattended;
• adjusting the working position of the cutting device;
• before clearing a blockage;
• before checking, cleaning or working on the product
