6
EXAMPLE:
1111 NEWP:5555 TEL1:+906661234567 TEL2:+907771234567 DISABLE
Above example means:
o
New admin password is now “5555” and you have to use this new password to make new
configurations in the future. Please note it carefully.
o
You added a new user1 906661234567.
o
You added a new user2 907771234567.
o
Weekly keep alive messages are disabled.
Once you sent this SMS to your device, it will reply you with an SMS including “CONFIG OK <XX>”
text (where XX is GSM signal strength, see “Table-2” for further details). Now LED will turn off and
your device is ready to operate.
Finally close the cover and insert screws on the back.
<XX>
MEANING
ADVICE
Between 19~31
Excellent Signal
Between 14~18
Good Signal
Between 9~13
Workable Signal
Try changing location
Between 1~8
Weak Signal
Check antenna / change device location
Table – 2 “GSM Signal Strength Levels”
3.
RESET & RECONFIGURE
3.1.
Re-configure Your Device
Press at least 1 second to the Configuration Button on your device anytime. LED will blink a few times
and please keep waiting for LED becomes solid ON. Then you might send a new configuration SMS to
device with using your latest password. The procedure of sending configuration SMS is same with
article “2.5. Send Configuration Commands”.
3.2.
Check GSM Signal Strength
Please follow article 3.1 and then only send your last password with SMS. You will receive “CONFIG
OK <XX>” text message where <XX> indicates GSM Signal Strength. For further description please see
“Table-2”.
3.3.
Reset Your Device
Press Configuration button at least 1 second. LED will blink a few times and please keep waiting for
LED becomes solid ON. Then send an SMS to the device including “RESET” command. LED will blink a
few times and become solid ON. Now your device has been reset, it is ready to start. Please follow
instructions starting from “2.4. Register Admin Number”.
Please note that RESET can be only made by sending “RESET” text message to your device (while it’s in
config mode). Password is not required for Reset function. Also Reset can be made from any third
person’s mobile phone; Admin or users not required to make Reset.
