4
2.
GETTING STARTED
2.1.
Insert SIM Card
A local SIM card is required to operate the system. Before inserting the SIM card, try it with a mobile
phone. And then:
o
Disable PIN code protection
o
Send an SMS to a mobile number for testing
o
Call a mobile phone number for testing
After above steps; please open the screws on the back of the item. And please insert SIM card into
your device, by opening the SIM card holder. Once SIM card is inserted, please lock the holder.
2.2.
Connect Power
Connect 12V DC power adaptor into terminal block numbers 1 and 2. Number 1 is positive (+12V) and
2 negative (GND).
Note: Wires should pass into the holes of the top cover!
Please check Wiring Diagram!
C12V of power adaptor to the terminal block
1 (usually RED wire).
Connect GND of power adaptor to the terminal block 2 (usually BLACK wire).
Please note power adaptor current should be at least 1000 mA.
