ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: [email protected]
Instruction manual
33625
Issue: 12/2017
Changes, print, punctuation and other errors reserved!
Page 11
GB - INSTRUCTION MANUAL
2. PRODUCT DESCRIPTION
The heat gun is intended for applications such as: heating and welding of suitable materials (thermoplastic mate-
rials), surface drying, heat shrink tubing, soldering copperparts, thawing of frozen water pipes, removing paint or
glue. Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or injury
resulting from improper use of the product (i.e. any other use than the above stated designated use).
3. DESIGNATED USE
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.
4. RESTRICTIONS
5. TECHNICAL DATA
1 - Nozzle
2 - Heatprotector (removable)
3 - Air intake
4 - On/Off switch & temperature gauge
5 - Focus nozzle
6 - Scraper nozzle
7 - Nozzle for working with pipes
8 - Broad nozzle
9 - Scraper
Rated power:
Air comsumption:
Power connection:
Temperature range:
Protection class:
Weight:
1000 W (I) / 2000 W (II)
300l/min (I) / 500l/min (II)
230V ~50Hz
350°C (I) / 550°C (II)
II / IP20
1,6 kg
See technical data.
6. NOISE EMISSION VALUES
7. IMPORTANT INFORMATION FOR INITIAL OPERATION
Check the voltage on the type sticker of the machine. The voltage of your power supply must not
deviate more than 10% from the indicated voltage.
