Equus 250L Скачать руководство пользователя

Страница: 8 / 15

HELPFUL TROUBLE-SHOOTING TIPS

NOT FEEDING EVEN

Seed gate opening may be set too close for the material being spread. To overcome, set the opening larger

and drive faster to obtain same spread rate.

Check material for foreign matter.

Check agitator drive pin for shear.

POOR SPREAD

Too much speed (over 560 PTO rpm) can cause uneven spread.

PTO speed too slow (PTO rpm under 520 rpm) will result in a narrow speed.

Bent fan blades.

Drive pin sheared or missing on fan hub.

Too windy for material being spread.

Agitator problem. Check tips under “Not Feeding Even.”

G. Operator not spacing spread runs properly for correct overlap.

For best results, cover area twice over at one-half recommended material usage rate. The second time

over, run halfway between first spreading width or in a criss-cross pattern. This method allows the most

complete and even coverage, as well as to give operator a chance to adjust gate setting to compensate for

too thin or too heavy a covering the first time over.

Seeder/spreader should run level or tilted slightly forward. Make sure lift arms on tractor are adjusted so

one side is not lower than the other.

Running agitator when not spreading can result in material being group up and possibly packing over

control gate opening. You can “over-agitate” material.

Содержание 250L
















Результаты поиска

Содержание 250L

Отзывы:

Похожие инструкции для 250L

Бренды по названию

Популярные бренды

Equus 250L, Руководство пользователя

Результаты поиска

Содержание 250L

Отзывы:

Похожие инструкции для 250L

Бренды по названию

Популярные бренды