www.prolight.co.uk
Saturn Spot
User Manual
11
Operating instructions
Show mode:
To access the show modes, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the
front of the unit to show
Shnd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
Sh 1
~
Sh 3
. Press the
“ENTER”
button to confirm the
setting. To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the front
of the unit to show
SLnd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
Nast
. Press the
“ENTER”
button to confirm the setting. Then select your
desired program.
To set the other units in slave mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
on the front of the unit to show
SLnd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose either
SL 1
. Press the
“ENTER”
button to confirm the setting.
The unit will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
DMX signal lost:
To change what the unit does when the DMX signal is lost, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the front of the unit to show
Lost
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
Auto
(Auto),
Soun
(Sound),
hoLd
(Hold the last command) or
bLAC
(Blackout). Press the
“ENTER”
button to confirm
the setting. To exit out of any of the above options, press the
“MENU”
button.
Sound sensitivity:
To adjust the sound sensitivity, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the
front of the unit to show
SEns
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
S000
~
S099
. Press the
“ENTER”
button to confirm the
setting.
Value: 000 - 099 (000 = low, 099 = high)
To exit out of any of the above options, press the
“MENU”
button.
Pan angle:
To access the pan angle setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the
front of the unit to show
AngL
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
540
(540° pan) or
630
(630° pan). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
