Equinox Systems Megabar System EQLED63, Руководство пользователя

Страница: 10 / 12

Overview (top)
Overview (back)
Operations
This foot controller is made specially for the Megabar system. All of the built-in programmes can
be accessed via the 4 foot switches. To control the Megabar using the foot switch controller, you
must first set the bar systems into “SLAVE” mode.
Static colour selection mode:
To activate this mode, press the “MODE” foot switch so the “R” LED indicator is lit, now use
the “UP” and “DOWN” foot switches to select the desired colour. To blackout the unit, press the
“BLACKOUT” foot switch and press it again to return it to the previous setting.
Sound active mode:
To activate this mode, press the “MODE” foot switch so the “G” LED indicator is lit, now the unit
will work to the music. If you require to blackout the unit at any point, press the
“BLACKOUT”
foot
switch and press it again to return it to the previous setting.
Built-in programmes:
To activate this mode, press the “MODE” foot switch so the “Y” LED indicator is lit, now use the
“UP” and “DOWN” foot switches to select the desired built-in programme. To blackout the unit,
press the “BLACKOUT” foot switch and press it again to return it to the previous setting.
Full on mode:
To set the unit to Full On you can press and hold down for 3 seconds any of the four foot switches,
this will give Full ON “WHITE” . To return to the previous setting press the “MODE” foot switch.
When Full On is activated you can still use the “BLACKOUT” foot switch.
Equinox Megabar Footswitch Operation