Equinox Systems Goboceptor, Руководство пользователя

Страница: 7 / 12

www.prolight.co.uk Goboceptor User Manual
7
Operating instructions
Show mode:
To access the show modes, press the “MENU” button and use the “UP” and “DOWN” buttons on the rear
of the unit to show
ShNd
on the LED display. Now press the “ENTER” button and use the “UP” and
“DOWN” buttons to choose between
Sh 1
~
Sh 4
. Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Show mode speed:
To adjust the show mode speed, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show
SPEE
on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to choose between
0
~
100
. Press the “ENTER” button to confirm the setting.
Value: 0 - 100 (0 = slow, 100 = fast)
To exit out of any of the above options, press the “MENU” button.
Master/slave mode:
To set the master unit, press the “MENU” button and use the “UP” and “DOWN” buttons on the rear
of the unit to show
SLNd
on the LED display. Now press the “ENTER” button and use the “UP” and
“DOWN” buttons to choose
Nast
. Press the “ENTER” button to confirm the setting. Then select your
desired program.
To set the other units in slave mode, press the
“MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show
SLNd
on the LED display. Now press the “ENTER” button and use the
“UP” and “DOWN” buttons to choose
SLAv
. Press the “ENTER” button to confirm the setting. The unit
will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active:
To access sound active setting, press the “MENU” button and use the “UP” and “DOWN” buttons on the
rear of the unit to show
SoUn
on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to choose between
on
or
off
. Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Sound sensitivity:
To adjust the sound sensitivity, press the “MENU” button and use the “UP” and “DOWN” buttons on the
rear of the unit to show
SoSE
on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to choose between
0
~
100
. Press the “ENTER” button to confirm the setting.
Value: 0 - 100 (0 = low, 100 = high)
To exit out of any of the above options, press the “MENU” button.