www.prolight.co.uk
Arcus 2000 Low Fogger
User Manual
9
Operating instructions
Channel
Value
LCD display will show
Function
CH1
000-255
FOG (0-100%)
Output volume (0-100%)
CH2
000-255
FAN (1-100%)
Fan speed (slow-fast)
CH3
000-127
-
Low fog mode (water vapour & fog fluid)
128-255
-
Low haze mode (water vapour only)
DMX mode:
Press the
button on the unit to display
‘DMX Address’
, you can now adjust the DMX address
between 1 and 510 by using the and buttons.
MENU
You can then connect the DMX controller, the display will show:
‘DMX-512 Add:’
‘FOG FAN’
The FOG (output volume) and FAN (fan speed) can be adjusted via the DMX controller along with the
mode required. Please note: when CH3 is between values 128-255, CH1 must be between 001-255.
STOP button:
The
button on the unit will stop the output when in
‘Timer’
or
‘Manual’
modes, and will return to
the home screen when changing settings. This must be done to enable
‘Timer’
or
‘Manual’
modes.
MENU
Cleaning and maintenance:
We recommend a frequent cleaning of the unit. Make sure the machine has cooled before cleaning.
Please use a soft lint-free and moistened cloth. Never use alcohol or solvents! Clean the output nozzle
after each use to remove fluid residues and water vapour. The fluids we recommend are non-hazardous
to the environment and can be disposed of via the sewage system.
There are no serviceable parts except for the fuse.
Maintenance and service operations are only to be carried out by authorised dealers.
Replacing the fuse:
Only replace the fuse with a fuse of same type and rating.
Before replacing the fuse, disconnect from the mains, see the following for procedure:
Step 1: Open the fuse holder on the rear panel with a suitable screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
(Replacement fuses should be of the same value as originally supplied)
Step 4: Replace the fuse holder in the housing.
Should you need any spare parts, only use genuine parts.
If defective, please dispose of the unusable part in accordance with the current legal regulations.
Should you have any further questions, please contact your dealer.
