www.prolight.co.uk
Arcus 2000 Low Fogger
User Manual
8
Operating instructions
Operating instructions
Timer mode:
Press the
button on the unit to display
‘Timer Interval Duration’
, you can now adjust the interval
time from 1s to 600s by using the and buttons.
Press the
button to display
‘Timer Output Duration’
, you can now adjust the output time from
1s to 600s by using the and buttons.
Press the
button to display
‘Timer Volume Output’
, you can now adjust the output volume from
1% to 100% by using the and buttons.
Press the
button to display
‘Fan speed’
, you can now adjust the fan volume from
1% to 100% by using the and buttons.
Once set you can then use the button to enable this mode.
The display will show:
Interval: ___S
Duration: ___S
with the settings previously applied.
Press the
button once to stop output.
TIMER
MENU
MENU
MENU
MENU
STOP
Manual mode:
Press the
button on the unit to display:
FOG VOLUME ___%
FAN SPEED ___%
Press the
button to switch between
‘FOG VOLUME’
and
‘FAN SPEED’
, you can now adjust the
fog volume from 0% to 100% and fan speed from 1% to 100% by using the and buttons.
Press the
button once to stop output.
Please note: the
‘FOG VOLUME’
setting will be inaccessible when the unit is in Low Haze Mode.
MANUAL
START
MENU
STOP
Mode settings:
Press the
button on the unit to display
‘Mode’
, you can now select between
‘Low fog mode’
and
‘Low haze mode’
(water vapour only) by using the and buttons.
MENU
Remote control:
To control the unit via the wireless remote, connect the receiver to
the remote control input on the rear of the unit. Once this is done
manual mode can be switched on or off with the lock and unlock
buttons as shown on the left. The volume output and fan speed
must be set prior as this cannot be controlled from the remote.
Please note: the
‘FOG VOLUME’
setting will be unaccessible when
the unit is in Low Haze Mode.
Stop
output
Output
fog
