www.prolight.co.uk
Arcus 2000 Low Fogger
User Manual
6
Operation:
Place the unit on a level surface.
Always disconnect it from the mains supply before filling as water/fluid could be spilled.
Water replenishment:
Always take care when filling the tank to prevent water getting inside the main housing.
If water should get inside the main housing, disconnect the unit from the mains immediately
and consult a technician.
Power the fixture down using the on/off switch on the rear panel and unplug the power cable.
Open the water tank by turning the handle
clockwise
and lifting the lid at the front of the unit and refill
using clean water that is free from impurities which could lead to damaging the unit. Ensure the water
doesn’t exceed the max. water refill mark inside the tank. Close the tank lid and lock by turning the
handle
counter-clockwise
, plug the power cable back into the unit and power it on using the on/off
switch on the rear panel. Once the fixture is powered back on the green max. water indicator will
illuminate. If the red indicator is still illuminated this indicates there still isn’t sufficient water in the tank.
Repeat the steps above to top up the tank.
Do not move the unit with water inside the tank.
Please note: the warning on the LCD display will automatically clear once the tank is sufficiently filled.
Fluid replenishment:
Always fill the tank away from the unit to prevent fluid getting inside the main housing.
If fluid should get inside the main housing, disconnect the unit from the mains immediately
and consult a technician.
Power the fixture down using the on/off switch on the rear panel and unplug the power cable. Turn the
fluid bottle lid counter-clockwise to unscrew and remove the fluid tank from the main housing.
Fill the tank with fluid and place the tank back in the housing. Place the lid on the fluid bottle and turn
clockwise to tighten. Plug the power cable back into the unit and power it on using the on/off switch
on the rear panel.
Please note: the warning on the LCD display will automatically clear once the tank is sufficiently filled.
Operating instructions
Operating instructions
