If not continuously drained, the unit will need to be drained manually.
Note: When the water collection tank in the unit gets full, it will stop
working and an error code of “Ft” will be displayed on the Control Panel.
Turn off the appliance and unplug it.
If the unit needs to be moved, do it carefully to prevent water
from spilling.
Securely connect the drain hose provided to the unit at the Lower
Drain Outlet.
Place the other end of the drain hose into a drain pan below the
Lower Drain Outlet.
Remove the Lower Drain Plug to drain the water. The unit can be
tilted slightly backwards up to 20 degrees, to drain completely.
After draining the water, replace the plug.
Note: When draining the Dehumidifier
Ensure that the water flows freely and the hose is straight and not
kinked, bent or obstructed in any way.
Use only the drain hose that is provided, as another one may not
fit properly over the opening.
Ensure that the end of the hose is not submerged in the collected
water, otherwise it can cause an air lock in the hose.
Maintenance
Disconnect the appliance from its power source during cleaning or
when being serviced.
Do not touch the evaporator surface with bare-hands as this could
cause injury of fingers.
Warning!!!
The unit is equipped with a HEPA filter which should be replaced as
needed. HEPA filters are sold separately.
Do not clean the appliance with any chemicals or abrasive materials.
14
