Start-up and Shutdown
Cool - Air Conditioner
Air - Air Purifier/Fan/Ventilation
Dry - Dehumidifier
10
Operation
Press
Power
to turn the unit on or off.
Air
(Air Purifier/Fan) mode is the default.
Press
Mode
button to select the desired operation mode. The unit
has three operation modes: Cool, Dry and Air (Air Purifier/Fan).
Press
Mode
button repeatedly until the
Cool
icon lights up.
Press
Up/Down
arrows to adjust the temperature which is displayed
O
O
on the screen. The temperature can be set between 60.8
F and 89.6 F
Press
Speed
button to select the desired fan speed.
Press the
Swing
button to keep the air flow steady or to have the
louvers move up and down.
Note: The air conditioner stops if the room temperature is lower than
the selected temperature.
Press
Mode
button repeatedly until the
Air
icon lights up. In Air Purifier
mode the air is filtered through a HEPA Filter, and clean air is circulated
in the room. There is no cooling.
Press
Speed
button to select the desired speed.
Press
Mode
button repeatedly until the
Dry
icon lights up. The
dehumidifier removes moisture from the air and collects the water
inside the appliance. Connect a hose to either of the drain outlets
at the back of the unit. This allows the water to drain out.
Note: In this mode, the fan is at low speed and the temperature
cannot be selected.
