Equator EZ 4000 CV, Руководство пользователя

Страница: 19 / 26

17
4
6
7
8
9
5
Graphic
Display
Time - button
Time + button
Program Dial
Start/Pause
button
Venting or
Condensing
selection
button
Display the selected program and its condition, such as the temperature, spin speed,
remaining time, rinse times, water level, and error messages.
Press this button to decrease the dry time from the default start time of 60 minutes in
5 minutes increments.
Press this button to increase the dry time from the initial condition of 60 minutes to
120 minutes in 5 minutes increments. The maximum time is 120 minutes.
Turn this dial to power on/off, and select one of the 14 available programs depending
on the laundry
Press this button to start or interrupt the selected washing program.
Press this selection button for 5 seconds to select either the venting dry cycle, or the
condensing dry cycle. The default condition is the condensing cycle, and if you select
the venting cycle, the symbol will be displayed.
DRY FUNCTIONS
The indicator light and the display will show the selected program.
is completed. In drying cycles, the door can be opened when the symbol displays on the screen. Please do not
try to force the door open.
Breaking the door handle is not covered by warranty.
In the drying cycles, the door can be opened after spinning, the symbol will be displayed on the screen.
will lock the door and the wash cycle will start, until the whole program
Pressing the start button
1
2
3
Prewash button
Water Level
button
Delay Start
button
Press this button to add pre wash cycle to the wash program, if the laundry to be
washed is heavy or dirty.
Press this button to change the initial water level of the selected program.
Press this button to select the delay time options from 1 to 24 hours in one hour
increments.
WASH FUNCTIONS
If a change is to be made after the start time is set, turn the dial to “OFF” position, select the desired
program again, and then press this button.
Press this button