EQUATION 3276000644972, Сборка, использование, руководство по обслуживанию

Страница: 49 / 60

3. INSTALLATION
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
●
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
●
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
cutout, this appliance must not be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched on and off by the utility.
●
WARNING:
In order to avoid overheating, do not cover the heater.
●
The heater must not be located immediately below a socket-outlet.
●
Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
CAUTION: This mobile heater is intended to be used mainly in workshops, craftsmen or
garages. Do not use in bathrooms.
WARNING: This portable heater is intended mainly to be used in workshops, light
industries or garages. Do not use it in bathrooms.
WARNING: Your heater shall be used as portable appliance only (thanks to respect all the
safety warnings given below).
Move the heater only by its handles.Never move the heater when it’s working. Never let
the heater under the rain or under wet conditions.
Put the heater only on plane, clean & empty surface.
WARNING: Let a minimum distance of 1m between any side of your appliance and any
obstacle (furniture or walls, for example)
4. HOW TO USE
Plug the appliance to a 220-240V~ 50-60Hz socket. If you are not sure, we advice you to
contact a professional electrician for more details.
There is a 4 positions switch on your appliance: 0 (Stop) – Fan only - Fan & heating low
temperature - Fan & heating high temperature.
Turn the thermostat clockwise to increase the temperature.
Set the working time with the timer (0-180 minutes)
When using without timer, the cursor must be on « ON » which indicates the heating
function permanent.
When usint with timer, the cursor must be on « OFF » and hear a "clack" then put the
wanted time from 0 to 180 min.
49