Equalizer Econo 10000, Руководство оператора

Страница: 16 / 35

16
3.3.2 OPERATION OF THE METERING UNIT AND THE GEARBOX
ZERO MAX GEARBOX WITH SCREW CONTROL
1. CALIBRATION USING THE ZERO MAX GEARBOX
The screw control regulates the output revolution of the Zero Max gearbox. The scale of 0 to
4.5 only serves as an indication with 0 = nill rpm and 4.5 = maximum rpm. The maximum
output: input ratio is 1:4.
NB: No other adjustments may be made to the metering unit as it will influence the settings.
3.3.3 ADJUSTMENT OF AIR PRESSURE BY MEANS OF FAN SPEED
MANIPULATION
Air Pressure Gauge (kPa) Oil Pressure Gauge (MPa) on fan
Use the table below as a guideline to set the air pressure reading on the air pressure gauge (kPa).
NOTE: The air pressure readings of the various tanks may differ. Always do the set up using the
lowest reading.