Equalizer International FA3TM, Инструкция оператора

Страница: 5 / 34

FLANGE ALIGNMENT TOOLS
OPERATOR INSTRUCTION MANUAL
PAGE 3
2. SAFETY INFORMATION
The operator MUST read this manual prior to using the tools.
Failure to comply with the following cautions and warnings could cause equipment
damage and personal injury; read the manual fully!
Read all the following instructions, warnings and cautions carefully. Follow all safety
precautions to avoid personal injury or property damage during system operation.
Equalizer International Ltd cannot be responsible for damage or injury resulting from unsafe
product use, lack of maintenance or incorrect product and/or system operation. Contact
Equalizer International Ltd when in doubt as to the safety precautions and applications. To
protect your warranty, use only good quality hydraulic oil of the grade 32cSt.
Only people competent in the use of mechanical and hydraulic equipment should use these
tools.
In all installations the site safety requirements must be adhered to. ALSO the safety of the
operator, and when present, any assisting personnel, is of paramount importance along with
the safety of others including, when present, the general public.
These instructions are only to cover the safe operation of THE EQUALIZER HT125KM, FA3TM
AND FA6TE FLANGE ALIGNMENT TOOLS, during normal maintenance/installation operations.
All other safety aspects must be controlled by the operation supervisor.
CAUTION :
1. The tools must not be attached to a pressure vessel nozzle
2. The tools must not be attached to a flange joint prior to
misalignment