eqss Genie GEN-5 Series, Руководство по установке, Страница: 23 / 24

EQUIPMENT SAFETY SYSTEMS
75 Naxos Way, Keysborough 3173 Victoria Australia
P: +61 3 8770 6555 E: support@eqss.com.au
Genie GEN-5 Series
Installation Manual
REV 2.0 24/09/2020 Model6253 OverWatch ™ Installation Manual Document # DO001235
| 23 of 24 |
Setting Name Description Default
wifi_on_gesture_count
The number of times to cover and uncover the sensor
to enter Wi-Fi mode.
3
wifi_on_gesture_time
The timeout before OverWatch stops waiting for the
next part of the gesture in milliseconds
3000
wifi_on_gesture_initial_time
The timeout after startup before OverWatch stops
waiting for start of the gesture in milliseconds
10000
driving_state_timeout Mode selection switch timeout 7000
Polarity and Input Style
The table below describes each setting
Setting Name Description Default
joystick_drive_forward Direction of joystick to move EWP forward forward
joystick_elevate_upward Direction of joystick to move EWP upward forward
joystick_neutral_move
Direction of joystick that requires monitoring when in
neutral
forward
elevate_polarity Direction of signal logic low
drive_polarity Direction of signal logic low
trigger_polarity Direction of signal logic low
joystick_polarity Direction of signal logic low
neutral_safe Monitor when no drive mode set yes
driving_state_input Direct, timer based or separate joysticks timer
Bypass
Setting Name Description
overwatch_state Redundant active
test_deadman_state Test channel enabled for primary cutout bypassed