eqss Genie GEN-5 Series, Руководство по установке, Страница: 12 / 24

EQUIPMENT SAFETY SYSTEMS
75 Naxos Way, Keysborough 3173 Victoria Australia
P: +61 3 8770 6555 E: support@eqss.com.au
Genie GEN-5 Series
Installation Manual
REV 2.0 24/09/2020 Model6253 OverWatch ™ Installation Manual Document # DO001235
| 12 of 24 |
5. Trigger Connection:
Locate the Orange wire
from the harness coming
from the joystick (14 pin
connector) and cut it in
half.
Solder the Green wire
from the OverWatch
™
ECU harness to the
Orange wire
on the side
that is coming from the
joystick.
Solder the Blue wire from
the OverWatch
™ ECU
harness onto the
connector side of the wire
that was cut.
6. Joystick Connection:
Solder the Grey wire from
the OverWatch
™ ECU
harness onto the Yellow
wire coming from the
joystick.
7. Remove the buzzer and
the E-Stop button to have
better access to the main
circuit board.