EQUIPMENT SAFETY SYSTEMS
75 Naxos Way, Keysborough 3173 Victoria Australia
P: +61 3 8770 6555 E: [email protected]
Genie GEN-5 Series
Installation Manual
REV 2.0
24/09/2020
Model6253 OverWatch
™
Installation Manual
Document # DO001235
|
20 of 24
|
Change Model Configuration
To reconfigure the OverWatch
™
for a different model requires an authorisation password to be supplied by a
service manager. The authorisation password is generated from the EQSS website. The EQSS website requires a
login username and password. If you are a service manager and do not have a username and password, contact
EQSS to register. Follow the instructions below to obtain an authorisation password.
1.
Open your preferred web and enter the following into the address bar
http://www.eqss.com.au/overwatch
to open the Login page
2.
Select Customer
3.
Enter your username and password
4.
Ask the service technician for the serial number shown on the Setup page or on the ECU module along with
the owner details of the EWP and complete the details form then click Generate Hash
5.
Provide the 5-digit hash password to the service technician
Genie Gen 5