eqss Gen-3 LMS, Руководство по установке

Страница: 19 / 53

Compensation Pressure Sensors
Step Description Diagram
1. Disconnect the flexible hydraulic
hoses connected to the
compensation cylinder under the
rear of the machine.
Connect the supplied hydraulic tee
connection and pressure sensor into
the compensation head pressure
line.
View from under the machine at the
rear
2. Connect the supplied hydraulic tee
connection and pressure sensor into
the compensation rod pressure line.
Start the machine, pressurise the
boom and check for leaks.
Connect the supplied M12 4 metre
cables (CB001026) into each of the
pressure sensors.
Run the snake tube and cables
towards the cabin and cable tie with
the other cables during External
Cable Completion on page 30.
View from under the machine at the
rear
Table 6: Compensation Pressure Sensor Installation
For further details on running the pressure sensor cables
refer to the Installation Index on page 7
VER: 1805241756 19 of 53