Swissvoice IP10S Phone Distributor Guide
3.2 End User Configuration
We assume that the end user has a Swi
tha
need to
For tha
1.
menu. Then, using
Authenticate login
subtopics with proper
username
, and
Authenticate passw
with proper
password
from
IP Lines Settings page
.
2.
If Quadro’s LAN IP address has been changed, the user has to either make the corresponding
changes in the network and SIP configuration of the phone. To perform phone setup, see
SwissVoice IP10s User Guide
.
ssvoice IP10S phone with a proper SIP image. Also we assume
t the end user has a Quadro with its LAN IP address set to 172.30.0.1. In that case he/she will only
set the
username
and
password
from
IP Lines setting
page
of Quadro via the phone keypad.
t he/she has to:
Select the
Menu
by pressing the OK (pic. 3) button on keypad to enter the
the Navigation buttons (pic. 2), go to the
Admin Settings
->
Change Settings
, and enter the
administrator password (by default “0000”) and press OK. Then go to the
SIP Configuration
topic and fill
User Id
and
Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.
5