Swissvoice IP10S Phone Distributor Guide
3 Configuration
pic. 1
pic. 2
pic. 3
pic. 4
3.1 Initial Configuration
The distributor needs to have a DHCP server and a TFTP server available.
1.
Copy the
swupdate_ip10.inf
and
swissvoicesip.cfg
files into the TFTP’s root directory. Note: See
Appendix A for configuration files.
2.
Configure the following parameters on the DHCP server.
•
Phone IP address range
•
Subnet mask
•
DNS address (DHCP option n°6)
•
Gateway address (DHCP option n°3)
•
TFTP server address (DHCP option n°66)
factory settings by performing the following steps.
3.
If necessary, restore the phone’s
rom the power socket or from the
LAN
if the power is
" is displayed, you may release the keys.
rough the LAN.
4.
Once
Swissvoice logo is displayed, followed by several messages
announci
•
ting for proxy server…
5.
ill get its network configuration from the DHCP server, and will download
configuration files from TFTP server. Then the idle screen is displayed. The phone is provisioned.
•
Disconnect the IP phone f
supplied over it.
•
Press and hold keys
1 4 7
.
•
Power up the IP phone while holding down keys
1 4 7
.
•
When the message "Restore factory settings
The IP phone is restarting with its factory settings: Connect the phone to the local network and
power
it up via the main power or th
the phone is powered up, the
ng the various steps:
•
Looking for DHCP server…
•
Loading information file …
•
Starting… please wait…
Wai
The phone w
Caution
:
The power supply must not be interrupted during the boot session. The phone could
be damaged.
Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.
4
