JA06122018
6
www.epvscreens.com
Screen Disassembly
1. Remove
ropes (G) and stakes (H)
from the ground.
2. At least two people are needed for this step. Unscrew the
knob
screws (I)
on the back sections of the legs and fold the hinges so
that half of the legs are folded up. Slowly lower the screen to the
ground (towards the closed legs).
3. Unlatch the hinged support bars and fold down other half of the legs.
4. Loosen and remove the
ropes (G)
and
knob screws (I)
from each leg.
5. Fully tighten the knob at the bottom of the
center support leg (B).
Remove the leg, fold, and place it
inside the
carrying bag (F)
provided.
6. Remove the
folding legs (B)
. Fold and place them inside the
carrying bag (F)
provided.
7. Detach the
screen material (D)
from the
folding frame (A)
by carefully pulling and lifting the edges to
unhook the material from the pegs.
8. Fold
screen material (D)
in half, folding the bottom of the screen towards the top. Then, fold in half
again in the same way. Lastly, fold the material into thirds to condense the length and place it into the
screen material bag (E).
*If you prefer to roll the material, instead of folding into thirds, roll from one end to the other after
folding in half twice.
This step is for 180" models only.
