JA06122018
5
www.epvscreens.com
7. Attach the
ropes and rings (G)
to each side of the legs at the top of the frame (1 at each eye and loop).
8. At least two people are needed for this step. Open the front side of
each
folding leg (B)
and carefully lift the top of the frame to stand
up the screen. While keeping a hold on the screen, open the other
side of each folding leg and fasten the last
knob screws (I)
on the
back sections of the legs and frame.
11. To secure the screen, hammer the
stakes (H),
at your
desired location, into the ground.
12. Finally, tie the 4
ropes (G)
to the
stakes (H)
to prevent
the screen from tilting or falling over. Your screen should
look like figure shown (right).
Note for 180" models:
To help level the screen, adjust the
center support
leg (C) or (J)
by tightening or loosening the knob at
the bottom of the leg.
