JA06122018
4
www.epvscreens.com
Leg Attachment
4. Carefully take the left and right
folding legs (B)
out of the
carrying bag (F)
and place it on a flat
surface. Unfold the left and right legs completely as shown.
5. Carefully take the
center support leg (C)
out of the
carrying bag (F)
and unfold it completely.
Note: If you are planning to use the
Wraith Veil rear projection material (D)
, attach the
short center
support leg (J)
instead of the
center support leg (C).
6. Line up the correlating screw holes on the frame and legs and fasten the
knob screws
(I)
to all sections,
excluding
the back sections of the
folding legs (B)
. These are to be secure in later steps.
Note:
Be sure to place the legs in which the eye loops are facing outward from the frame. These eye
loops will be utilized with the
rope with ring (G)
to help secure your screen in windy applications.
Warning:
The additional support sections, located at the middle section of the legs, may unfold on its own. Please
be sure to use caution while removing/placing the legs from/to the bag
This step is for 180" models only.
Note: A and B are for 180" models only.
