12282021JA
8
Step 16
: Install the
angle cover(j)
on each corner of the frame and install the LED light strip to hold down
the angle cover. Then insert the
LED light clip (l)
to hold the LED light strip in place.
Wall Installation
Step 17:
Measure the overall
length and height of the frame and
drill holes for the top brackets.
Line up the wall brackets with the
drilled holes on the installation
location and screw them in using a
Phillips
screwdriver.
If
not
installing into a structural wood
stud, use a hollow wall anchor then
screw in the M5x50 wood screws
with a screwdriver. Make sure the brackets are leveled.
Step 18
: Position the fixed frame screen onto the top wall brackets as shown below and push down at the
center of the top of the frame to secure.
Step 19:
With the frame slightly tilted outward; connect the bottom brackets onto the bottom groove of the
frame. Then secure them by screwing onto the wall.
For Technical Support or an Elite Prime Vision contact in your area, visit
www.epvscreens.com
